12
Firmware Update
1) Download the firmware file from official website www.neoline.сom, extract
the file from the archive.
2) Format the memory card and transfer the unzipped file to MicroSD memory
card.
3) Insert the memory card with the downloaded file into slot of the dashboard
camera.
4) Connect the power cable while holding “OK” button.
5) After switching on, the device will offer to update software. Confirm
the action
6) Light indicator will blink while the firmware file is uploaded on the device.
7) When the process is completed, the device will automatically reload.
8) Check in Settings menu whether a correct firmware version is displayed.
9) Format the memory card via menu of the dashboard camera.
Important! Do not disconnect power supply of the dashboard camera
during the firmware update.
[ Settings ]
Video settings:
Resolution:
1080FHD 1920X1080/720P 1280x720/VGA 640x480
Loop recording:
Off /1/3/5 min
With loop recording switched off, the device will stop recording when the
memory card is full. When /1/3/5 min is chosen, the device will write video files
of respective length but when the memory card is full, the previously written
files will be rewritten except files protected against deletion.
WDR:
On/Off
Exposure:
-2.0 to +2.0
Motion sensor:
On/Off
Audio recording:
On/Off
G-sensor:
Off /High Sensibility/Medium Sensibility/Low Sensibility
Date/Time stamp:
On/Off
Parking mode:
Off/5/10/30 sec
