10
2. Manual: when the device is connected to power supply and the engine is
working, press and hold for few seconds ON/OFF button to switch off/on the
device.
Loop Recording
1) Insert MicroSD card into the memory card slot – Loop Recording mode will
be automatically switched on.
2) Length of video recordings can be 1/3/5 minutes. It is recommended setting
the recording cycle to 3 minutes.
3) When there is no space left on the memory card for recording new videos,
the device will automatically replace them with old video files, except for files
protected from deletion.
4) Video recordings filmed in Loop Recording mode are stored
in folder: \DCIM\.
Emergency recording
Designed for protection of current video file against rewriting and deletion. To
protect the current video file, press Emergency Recording button during the
video recording and the recorded video file will be marked with a special mark,
which will prohibit the device from deletion and rewriting of this file.
Note:
“Protected” files can be deleted on a computer, having connected the de-
vice to the computer via USB cable in the delivery set. To delete a file in standby
mode, remove the protection via Menu or format the memory card.
1) Emergency recording switches on automatically upon response of G-sensor
(sharp acceleration, braking) or collision. Emergency recording is automatically
locked in order to avoid deletion during the loop recording.
2) Emergency recording can be started independently by pressing .Emergency
Recording button.
