Emergency recording
The Emergency recording is designed to create a video file protected from
overwriting and deletion. Press the Menu button to create such a video file. Now
the current video file is marked to prevent it from being deleted/overwritten. The
recording status of this file (timeline) is displayed at the bottom of the screen.
Updating the firmware
1) Please download the firmware file at www.neoline.com and extract the file.
2) Then format the memory card and move the extracted file(s) to the microSD
memory card.
3) Insert the memory card with the file into the DVR memory card slot.
4) Press and hold the OK button meanwhile connecting the device to the power
source.
5) While the firmware file is downloading, the indicator flashes.) Release the OK
button.
6) Once the update is complete, the device restarts automatically.
7) Enter Settings menu and check whether the correct firmware version is
displayed)
8) Format the memory card (use the DVR menu).
CAUTION!
Do not turn off the DVR power during the firmware update.
The Emergency recording is activated automatically when the G-sensor triggers
(sudden acceleration/deceleration), or at a collision. The Emergency recording is
locked automatically to avoid erasing during loop recording. The files protected
from overwriting are stored on the memory card in the Event folder.
4) The video recordings taken in Loop Recording mode are stored in the Video
folder.
12
