11
Removal of DVR
Pull DVR at the bottom in a circle in a counterclockwise direction relative to the
back wall of the groove on the recorder case.
Anti-glare filter (CPL filter)
The anti-glare (CPL) filter is an optical filter to ensure there are no glares and reflec-
tions on the windshield to improve video quality.
When using a CPL filter, follow the instructions below for the best video results:
1. Install the DVR on the windshield in accordance with the recommendations above.
2. Put a sheet of white paper on the dashboard
3. Rotate the CPL filter until the reflection of a sheet of white paper on the DVR
screen is minimal.
At night, it is recommended to remove the CPL filter to achieve the best recording
result.
After adjusting the position of the CPL filter, remember the position of the guide line
on the outer ring of the filter to be sure the next time setting the correct position
takes less time.
