Continuous Operation:
•
Push the two-direction switch leftward to ON and power LED is lit. Then the instrument begins to work.
•
Turn the speed control knob to set the rated speed
•
If use the Nonstandard accessories, please ensure the speed in indicating range
•
Push the two-direction switch rightwards gently to OFF and LED power is closed and the instrument is
turned off.
Touch Operation:
•
Ensure the speed control knob to the lowest position. Put the instrument on a solid and safe place and
plug in the main power
•
Push the two-direction switch rightward to the touch mode
•
Turn the speed control knob to set the rated speed
•
If a test tube is pressed into mixing head vertically, the instrument will begin to work and the power LED
will be lit.
•
Push the two-direction switch leftward gently to OFF and the instrument is turned off
Faults:
•
If a unit fault happens, please power down the instrument
If these faults are not resolved, please send the instrument back
Maintenance and Cleaning:
•
Proper maintenance can keep instruments working in a good state and lengthen its lifetime.
•
Be careful not spray the cleanser into the instrument when cleaning.
•
Unplug the power line when cleaning,
•
Only use neutral cleanse
neoLab Migge Laborbedarf-Vertriebs GmbH, Rischerstr. 7-9, 69123 Heidelberg
Tel. 06221 / 84 42-0 [email protected] www.neolab.de
neoLab Berlin Tel. 030 / 30 87 45-0 neoLab München Tel. 089 / 35 61 88 -0
