Neogen Corporation AccuPoint 2 ATP, Manual, Page: 6 / 16

AccuPoint 2 User’s Guide
6
Navigating through the fields on the AccuPoint 2 display
Use the toggle button to move between fields on the AccuPoint 2 display.
• Move the toggle button in each direction to move to the desired field.
• Once at the field to change, press the toggle button to enter.
8
Once in the field, move the toggle button down or up to scroll through the
options.
8
Exit the field by pressing the toggle button.
The AccuPoint Data Manager software
The AccuPoint 2 instrument can be utilized with the Data Manager software to upload
testing site information and to download testing results. Using this combination will
allow for the tracking and analysis of a facility’s testing results. The procedure starts
with the definition of a test plan in the Data Manager software. This test plan identifies
all of the testing sites in your facility that could be tested and assigns pass, marginal
and fail thresholds to each site. Once the test plan is defined uploading the information
to the instrument will allow the user to select the appropriate site before taking each
test. The result along with the time, date, user, site name and site group can then be
downloaded to the software for tracking and analysis.
SELECTING THE TESTING SITE
If a test plan has been uploaded from the Data Manager software, toggle to the
appropriate site through the Site Number, Site Group or Site Name fields.
The Site Name field has an option for selecting an entry at random. When “Random”
appears in the field, pressing the toggle button will cause the instrument to select one
of the Site Groups or Site Names within the displayed Site Group at random.
Sampler type: surface or liquid
The AccuPoint 2 instrument operates in two sampling modes: surface and liquid. Both
the AccuPoint Surface and Access Samplers are designed to be read in surface mode.
The AccuPoint Water Sampler is read in liquid mode.
If utilizing the AccuPoint Data Manager software and the test plan has been uploaded
to the AccuPoint 2 instrument, it will automatically change to the appropriate testing
mode, surface or liquid, when toggling to the testing site.
A symbol, like the one illustrated at left, will appear on the display when the
instrument is in liquid sampling mode.
AP2 Users Guide1a.indd 6 10/20/2009 3:47:38 PM