Neogen Corporation AccuPoint 2 ATP, Manual, Page: 11 / 16

Questions? Call Neogen at 800/234-5333 or 517/372-9200
11
INSTALLING NEW BATTERIES
To access the batteries, push
down and slide open the access
door on the top of the instrument.
Replace the batteries according
to the diagram on the label on the
back of the instrument. Use only 4
rechargeable AA-size NiMH batteries
(Neogen part #9610). Old batteries
may be disposed of as nonhazardous
waste.
NOTE: If the batteries are
removed for more than 1 minute, the
time and date must be reset, but the
data readings will be retained.
SLEEP MODE
When not being actively used
for more than five minutes, the
AccuPoint 2 instrument will enter
“sleep” mode and dim the color display to conserve power. Depressing the toggle
button causes the instrument to return to active mode.
COMMUNICATING WITH THE DATA MANAGER SOFTWARE
The AccuPoint 2 instrument can communicate with a computer
through the Data Manager software to upload the Test Plan and User
information to the instrument or download the testing results from the
instrument. All communication with the instrument is accomplished
through the supplied USB cable. The USB connection along with the
AC adapter port are located behind the access door on the side of the AccuPoint 2
instrument. When the cable is plugged in and a connection is established, the graphic
above will appear on the instrument’s display.
DOWNLOADING TEST RESULTS TO THE DATA MANAGER SOFTWARE
The AccuPoint 2 instrument can store up to 4,000 data records. The instrument will
display the number of stored data records on the User ID screen at power-up. Once the
limit has been reached, the oldest record will be discarded as each new record is added.
To download data to a computer:
1. Open the AccuPoint Data Manager program on the computer (if necessary, see
the software manual for program installation instructions).
2. Turn on the instrument and plug in the USB cable. If the USB cable is not connected
at the other end to your computer connect it now.
3. In the File menu, select Load Data. A dialog box will be displayed.
Battery access door. Push
down and slide toward back
of the instrument to access
batteries.
04:22P 01/10/2010
Jose 001
Line 1
Conveyor Belt 1
135
0011
Pass Marginal Fail
Liquid sampling mode
Display contrast
Reading Sampler
USB connection
established
Sampler not detected
Sampler door open
Date
User
Time
Site
Number
Site
Group
Site
Name
Test
Result
Record
Count
The correct battery
orientation is shown
on the back of the
instrument (below)
AP2 Users Guide1a.indd 11 10/20/2009 3:47:45 PM