16
17
01.
03.
02.
0
2
| S
C
O
P
E O
F D
E
L
IV
E
RY
0
2
| S
C
O
P
E O
F D
E
L
IV
E
RY
L C D F I X I N G B R A C K O N T H E n e oT W I S T L O C K Z 2 0 R S
If required, you can attach the LCD to the neoTwistlock Z20 RS.
Use a 1.5 mm Allen key to do this.
S W I T C H I N G O N
Press and hold the on/off button for one second. The neodri-
ves logo will appear in one second and the light will switch on
automatically. Wait until the trip screen appears. This can take
up to 5 seconds.
It is not necessary to press the battery button beforehand.
C O N N E C T I N G T H E L C D W I T H n e oT-
W I S T L O C K Z 2 0 R S
01.
neoTwistlock Z20 RS is mounted
02.
Set the LCD at a 90° angle,
turn clockwise to open it
03.
Done
R E M O VA L
Turn the LCD on the mounting plate clockwise through ap-
prox. 90°. This detaches the electrical connections and the
LCD can be removed. The system (LCD + S-Pedelec) should be
switched off prior to removal. However, there will be no dama-
ge if you mount or dismount the LCD while the S-Pedelec is
switched on.
NOTES:
To protect your S-Pedelec from unwanted use by third parties
or theft, the LCD should always be removed from the rocker
arm when not in use.
However, removing the LCD is no substitute for safeguarding
your S-Pedelec against theft, e.g. with a suitable bicycle lock.
Approx. 10 seconds after removal, the system turns off. The
light, if switched on, also goes off after approx. 10 seconds. Af-
ter removing the LCD, wait approx. 30 seconds before placing
it back on. Otherwise, a successful system initialisation
cannot be guaranteed.
02. 2 | STARTING THE SYSTEM
The USB charging port is
located in the lower part.
System On/Off
S W I T C H I N G O F F
Press and hold the on/off button for one second. The neodri-
ves logo will appear in one second and the light will switch off
automatically.