33
8.System Setup
If any revision is required, we suggest you contact our engineer to get detailed instruction first. (P.S. All parameters
were set up before shipping, usually no adjustment is required.) This section will provide a brief introduction for all
parameters, to get detailed adjustment instruction, please contact our technical engineer.
Right buttons functions:
Config save: to click Save after changing the parameter
Administrator login: to prevent any misoperation, this interface will be inactive and greys out. To make it inactive,
Administrator needs to login.
Change password: before Administration login in, this function is not visible.
If the password needs to be changed, please login and click Change password. A window will pop out, enter the original
password. Then follow steps to enter the new password. A successful window will pop out when it’s finished.
Version: the current software version will be displayed below.
警告：本部分的功能是针对贴片机机器参数设置，所修改的参数会引起全部贴装文件的参数
改变，更改参数有导致设备无法使用的可能，所以请慎重修改！
Warning: this part aims at machine’s global parameter settings, any modified parameter will
influence all working files, when modify this part please consider seriously.
Zhejiang
NeoDen Technology Co.,Ltd.
