3
4. Installation Instruction
4.1 Power Supply Connection
IN6 is used in 110V/220V single-phase connection mode and is connected according to the user
environment. Wires connection method is shown as picture. L stands for the live wire, N stands for
the zero wire, and E stands for the ground wire, connect to the 220V (110V) power supply.
According to the wiring requirements, the L should be connected to one live wire, and the N should
be connected to one zero wire; the E should be connected to one ground wire properly
4.2 Installation Attentions
♦
Power supply requirement:110V/220V
♦
For desktop reflow oven, should be working on workbench, don’t suggest to use wooden material
♦
The machine should be set in standard SMT workshop, stay away from flammable and explosive if
couldn’t meet previous requirements.
♦
Exposed wire harness should be well protected, prohibit to expose at the passage or flue in case of
causing any accident.
4.3 Status of Indicators
There is a green bar indicator at the PCB entrance that indicates whether the temperature in all
zones has reached the set temperature. This indicator lights up when the actual temperature of all
zones reaches the set temperature.
4.4 Operation instructions
♦
Power-on
L
N
E
