5
♦
Start or stop heating
Press the OK button in the main interface, the machine will switch from STANDBY state to
WORKING state, and begin to warm up.
If you need to switch from WORKING state to STANDBY state, just press the OK button in
WORKING state.
♦
Temperature curve
Connect the temperature sensor to the TEMP SENSOR connector, attach the temperature sensor to
the PCB, and then click the
“
Restart
”
button on the Graph interface after PCB is put into the oven
to get the temperature curve.
♦
Power-off
Turn the red power switch to the OFF position and turn off the machine.
♦
Change language and the unit of temperature in machine
After the power switch is turned to ON, the NeoDen logo will be displayed on the screen. Long
press the OK button to enter the Debug mode interface. In this interface, you can change the
language and temperature unit of the machine.
Working State
Real-time
Power size