NEO STORMER QUAD, User Manual

Page: 13 / 35

P. 13
- Neo Stormer Quad English version
ture to either hold its last received DMX signal values,
or clear them.
1. Press the <UP/DOWN> buttons until you reach
Config.
2. Push the <ENTER> button.
3. Using the <UP/DOWN> buttons, navigate to DMX
Status, then press the <ENTER> button.
4. Use the <UP/DOWN> buttons to select either
Value Hold, or Value Clear.
5. Press the <ENTER> button to confirm.
LCD Display On/Auto Off:
Display mode On will keep the LCD illuminated con-
tinually, Auto will shut the display off after 30 seconds
of inactivity.
1. Press the <UP/DOWN> buttons until you reach
Config.
2. Push the <ENTER> button, and navigate to Dis-
play Mode.
3. Push the <ENTER> button, then select either On
or Auto, and press the <ENTER> button.
Key (Button) Protection Mode:
With Key Lock active, buttons will be unresponsive to
any initial button press after 30 seconds of inactivity.
Temporary unlock will occur with more than 1 button
press. To disable this feature, activate Key Unlock.
1. Press the <UP/DOWN> buttons until you reach
Config.
2. Push the <ENTER> button.
3. Press the <UP/DOWN> buttons until you reach
Key Mode, then press<ENTER>.
4. Use the <UP/DOWN> buttons to select either
Key Lock, or Key Unlock, and press the <ENTER>
button.
Temp Unit CS
1. Press the <UP/DOWN> buttons until you reach
Config.
2. Push the <ENTER> button, and navigate to
Temp Unit CS
3. Using the <UP/DOWN> buttons to select Celsi-
us degree or Fahrenheit degree
Test Mode:
1. Press the <UP/DOWN> buttons until you reach
Test LED.
2. Push the <ENTER> button.
3. Now, you can choose to test all of the LEDs at
once, or individually test each of its 9 segments.
Use the <UP/DOWN> buttons to navigate, and
press the <ENTER> to confirm.
DMX Values In-Depth
(16-Channel Mode)
Ch. Value Function
1 000 <--> 255 Master Dimmer (0-100%)
2 000 <--> 255 Red segment Intensity (0-100%)
3 000 <--> 255 Green segment Intensity (0-100%)
4 000 <--> 255 Blue segment Intensity (0-100%)
5 000 <--> 255 Write segment Intensity(0-100%)
6 000 <--> 255 Flash duration (0-full on)
7 000 <--> 255 Strobe rate (0-30Hz)