P. 6
English Version
| NEO STORMER 1200 IP
6 · DMX ADDRESS SETTING
When using the controller to control multiple fixtures,
each fixture shall be provided with a DMX address
to receive signals from the controller and respond
correctly, There are 3 control modes in this product,
which are simple mode, standard mode and extent
mode.
FOR EXAMPLE:
The fixture has 20 channels at
standard mode.
We set the 1
st
fixture: DMXAddress 001
Then the 2
nd
fixture DMX Address 021 the 3
rd
fixture
DMX Address 041, the 4
th
fixture 61... and so on.
REMARKS
1. Only one fixture can be set to host in one signal line, remove DMX control signal when using host function
2. In the synchronous control of multiple fixtures parameters can be transmitted from the master including:
DMX mode, display setting, operation mode (user memory data included); All fixtures accepting parameters
will automatically be set to slave mode.
Turn on the fixture, If operating menu is locked press
ENTER for 5 Sec, the fixture will be unlocked;
Then press
MENU
, or
UP
or
DOWN; to find Add menu.
Press
ENTER , display DMX Address;
Press
UP
/
DOWN set DMX Address value;
Press
ENTER to confirm, then the fixture
automatically saved this DMX address
Press
MENU
, will return to the upper menu.
7. SPECIAL FUNCTION DESCRIPTION
LEVEL 1
LEVEL 2
DESCRIPTION
DMX ADRESS
001-512
Set DMX Adress
DMX
CHANNEL
MODE
7 Channel Mode
7 Channels DMX Mode
14 Channel Mode
14 Channels DMX Mode
42 Channel Mode
42 Channels DMX Mode
DIMMER
MODE
Dimmer Mode 1
Dimmer Mode 2
Dimmer Mode 3
Dimmer Mode 4
Dimmer Mode 5
DIMMER
CURVE
Dimmer Curve 1
Dimmer Curve 2
Dimmer Curve 3
Dimmer Curve 4
