1
Specifications and Features
• Current Draw: 60mA
• Voltage: Draws current from the PowerSeries Neo alarm controller (10.8VDC to 12.5VDC)
• Frequency: 433MHz (HSM2HOST4), 868MHz (HSM2HOST8), 912-919MHz
(HSM2HOST9
UL
)
• Zones - can receive signals from up to 128 wireless zones, plus 16 wireless keypads. Also supports
up to 32 wireless keys
• Supervisory - programmable supervisory window
• Can be wired up to 1000 ft. / 230 m from the main panel with 22 AWG wire
• Connects to Corbus
• Compatibility: The HSM2HOST is used with PowerSeries Neo alarm panels
• Operating temperature: 0°C to +49°C (32-122°F)
• Relative humidity: 93% non-condensing
• Separate, built-in wall and case tampers
NOTE:
For Commercial BURG (UL) the Supervisory window shall be set to 4 hours.
For Residential Fire (UL/ULC) the Supervisory window shall be set to 200 seconds.
For Residential BURG (UL/ULC) the supervisory window shall be set to 24 hours.
For UL Home Healthcare applications the supervisory window shall be set to 24 hours
Only models operating in the band 912-919 MHz are UL/ULC listed where indicated. Only UL
approved devices are to be used with UL/ULC listed systems.
Compatible Wireless Devices
Please refer to the instruction sheets of the following devices for more information. On the chart
below and throughout this document, x in the model number represents the operating frequency of the
device as follows: 9 (912-919 MHz), 8 (868MHz), 4 (433MHz).
The HSM2HOSTx (x= 4/8/9) can receive signals from the following devices:
Alarm Controllers
PowerSeries Neo alarm Controllers
HS2128
HS2064
HS2032
HS2016
Modules
Wireless keypads
HS2LCDWFx
HS2LCDWFPx
HS2LCDWFPVx
Wireless Devices
Wireless PG smoke detector
PGx926
UL
Wireless PG smoke and heat detector
PGx916
UL
Wireless PG CO detector
PGx913
Wireless PG PIR motion detector
PGx904(P)
UL
Wireless PG PIR + camera motion detector
PGx934(P)
UL