NEO BOMBER, User Manual

Page: 12 / 26

16 14 Control
Normal 0 7
Reset All 8 15
Pan&Tilt Reset 16 23
TBD 24 55
Display Off 56 63
Display On 64 71
TBD 72 79
TBD 80 87
Hibernation 88 95
TBD 96 255
6. Unique Features
6.1 RDM, stand for “Remote Device Management”, with this
function, users can realize remote control of the device, such
as remotely changing DMX address, reverse pan/tilt setting,
check a lot of useful information such as temperature, pow
-
er consumption, fan speed. Etc. Every single device has a
unique RDM code before left factory to distinguish from each
other, usually not suggest users change this code freely.
6.2 Software upgrade function via DMX cable, if there is any
new firmware for this device come out, it can be upgraded
simply via a software upgrade box, no need to change any
mechanical parts. The upgrade box is not included in the
package, if need any further assistance pls just contact
authorized dealers.
6.3
Hibernation, the device will enter sleeping mode if acti -
vated after a period of disconnecting DMX signal to save the
power consumption, and will return immediately as soon as
the DMX signal is sent again.
6.4 Display back-up communication IC, there is a back-up
communication IC installed in the display PCB, so users
could replace at once if the working one is broken, no need
to wait long time from service.
6.5 Display flip, by press up and down button for more than
3 seconds, the display will flip automatically, this function is
useful to read menu conveniently when device is hanged.
BOMBER
ENGLISH VERSION
p. 12