NEO TOOLS 75-200, Instruction Manual

Page: 12 / 100

12
neo-tools.com
INSTRUCTION MANUAL
LASER RANGE FINDER
75-200
CAUTION:
Before using the device read this manual carefully and keep it for future
reference. Failure to follow safety rules from this manual may cause tool
damage or body injuries.
WARNING: Do not look directly at the source of laser beam.
Follow the below safety rules.
1. Do not modify the tool.
2. Use the laser device in accordance with the manufacturer’s instructions.
3. Do not intentionally point the laser beam at people or animals.
4. Do not point the laser beam at bystanders’ or animals’ eyes. Laser radiation
may damage your vision.
5. Always make sure the laser beam is not directed at reflective surfaces.
Reflective surface could project the beam at operator or bystanders.
6. Do not allow children to operate the device. Do not allow children in the
workplace when setting up and using the device.
7. When not using, store the device in a dry place, beyond reach of children.
8. Do not replace the laser unit with device of other type. All repairs must be
carried out by the manufacturer service.
The tool is equipped with class 2 laser device in accordance with EN
60825-1:2007.
Intended use
The device is designed to measure length, area and volume. Additionally,
the range finder features option of indirect measurements, that uses
Pythagorean theorem to calculate height. Dynamic measurement allows for
continuous measurements. Use the tool indoors in dry environment only.
Observe the following instructions when working for the best device operation.
Any use other than described below is not allowed and may cause device damage.
The laser range finder is powered from 2 x 1.5 V AAA batteries. Battery level is
indicated on the display in the upper right corner. When the battery sign does not
display even one bar, replace the device batteries with new ones.
Battery replacement:
1. Press the lock catch to remove the battery cover.
2. Insert 2 new AAA batteries, observe polarity for correct connection.
3. Close the battery cover.