5. RECHARGE METHODS
Since this device has a lithium polymer battery (as mainly used in mobile phones), it can be recharged
again and again. Before using the device, the battery needs to be fully charged for some 1-2 hours.
1. Connect the USB plug of the USB cable to your PC.
Open the rubber seal on the main device which protects
the micro USB connection. Then connect the micro
USB plug of the USB cable to the micro USB connec-
tion of the device
2. As soon as the connection is established, a bright-
green LED will illuminate on the device
3. When the charging process has
completed
, the
LED
will go out
4. Now the connection can be terminated
※
Please exercise caution when establishing the connec-
tion between the main mouse device and the micro USB
plug. Forceful use can damage the device.
1. Connect the micro USB plug of the USB dongle to
your device. Then connect the USB plug to your PC
2. As soon as the connection is established, a bright-
green LED will illuminate on the device
3. When the charging process has
completed
, the
LED
will go out
4. Now the connection can be terminated
※
Please exercise caution when establishing the
connection between the main mouse device and the
PC. Forceful use can damage the device.
※
Please only use the USB cable and USB dongle supplied to charge the Neo mouse
(other uses are not permitted)
[Using the USB cable]
[Using the USB dongle]
※
Overall view
Rechargeable
Connector
Change of
operation mode
Function key
Touchpad
Left-click
Scroll (up)
Scroll (down)
Right-click
This laser mouse can also be used on flat surfaces.
As a super-small and super-light mouse, it can also be used in very tight spaces.
I. Initial operation of the laser mouse
1. Connect the USB dongle to your PC.
2. On the main device, set the mode to "laser".
3. Use the mouse on a flat surface or on your mouse pad
※
The function key will not be operable when the laser mouse is in use
III. Usage tips for the air mouse
i.Easy handling during operation
Not only can the mouse be used on a flat surface, but also freely throughout the room. When operating
through the air, it is recommended not to control the computer with the entire arm, but using the wrist.
Use the pivot
of the wrist
Use the pivot
of the wrist
6. TYPES OF USES OF THE MOUSE
I. Initial operation of the laser mouse
II. Initial operation of the air mouse
III. Usage tips for the air mouse
i. Easy handling during operation
ii. Radius of the hand movement
iii. More exact clicking
iv. Touch function
IV. Changing the hand position when using the air mouse
V. Shifting the movement mode with the air mouse
i. General mode
ii. Reverse mode
iii. Free mode
iv. Test mode
VI. Additional types of use
i. Using the scroller
ii. Idle mode
iii. Fault message with low battery
iv. Disruption to wireless transfer
II. Initial operation of the air mouse
With the air mouse, the computer can be controlled by finger movements.
Controlling is not dependent on the location and works across long distances.
1. Connect the USB dongle to your PC.
2. On the main device, set the mode to "air". Place the mouse onto the floor for around five seconds
(place it on the
floor
for another five seconds should the spatial axis of the room change during later usage)
3. Attach the finger ring which fits your finger size to the corresponding holders on the mouse
4. Attach the mouse to your index finger using the finger ring
5. When controlling the computer through the room, touch the touchpad using your thumb
Touch Pad
ii. Radius of the hand movement
A function built into the device automatically evens out involuntary hand movements. For this reason,
very small movements of the hand do not cause the mouse pointer to move. As a result, somewhat larger
hand movements are needed to move the cursor.
Summary of Contents for NM930308001M
Page 6: ......
