Trouble Shooting
Troubles
Checking Item
Trouble Shooting
The unit doesn’t
work
1.Check and see whether the input voltage is the
same as the rating voltage。
2.Make sure that the working environment is
suitable for the unit。
1.Make sure that the input voltage is the same
as the rating voltage。
2.Ensure the working environment。
LED isn’t bright
enough
1.Check the input voltage
1. Make sure that the input voltage is the same
as the rating voltage。
The unit is not
controlled by the
DMX
1．Check the polarity of the DMX control signal
2．See whether the unit is working under DMX mode
3．Check whether there are two masters
1．Correct the polarity of the DMX signal。
2．Set up DMX working mode。
3．Select only one master in the loop。
Light set don’t
work rightly
1．Check the light sequence of every par light
1．Correct the light sequence。
The temperature
doesn’t show
1．Check the thermal IC on the LED panel
1．Change the thermal IC
6/ 7
