Operation Instruction
1、Stand Alone Mode
1．Stand Alone Mode: Auto, manual and sound
2．Working Mode Setting：Press different button to enter different working mode
2、Master/ Slave Mode
1．Master/ Slave Mode: Auto, manual and sound mode and no need to use controller。
2．Working Mode Setting：Select one unit as the master(auto sound or manual)，set up DMX address A001 in
other units，and all lights light Sequence Par.0 at the same time.
Master/ Slave Mode
Dmx line
Power line
Light
Signal
Par Par.0
A001
Dmx line
Power line
Light
Signal
Par Par.0
A001
AC Power
100~240VAC
50/60Hz
Power line
Light
Signal
Par Par.0
Host
3．Cable Connection in Master/Slave mode：Connect the DMX output of the master and the input of the first
slave unit with XLR-XLR cables, then connect the output of the first slave unit with the input of the second
unit, the rest may be deduced by analogy until all the slave units are connected.
4. Four Channel Control Mode：Set up 4-channel mode for all the Par Lights in the loop. Press Menu Button
until 4-CH is showed.
Note: If more than one piece master unit or DMX controller, 4-channel controller is connected, the slave
units may work out of the way
3、Master and Slave Working Mode for Par Light Set
1．Working Mode Setting：Set up the DMX address: A001 on all the Slave units and Par Light Sequence Par.1~4
Four pieces Par lights can form one set. Or the fixture can link with other products Neo-Neon produces so
as to get more abundant stage effect.
Fixture 1：IRDIP-9007426-00D-13（Single Unit 7x10W(4IN1)）
、IRDIP-9028426-00D-13（Light Set 7x10W(4IN1)）
Fixture 2：IRDIP-4016126-00D-13（Single Unit 16x3W(RGBW)）
、IRDIP-4064126-00D-13（Light Set 16x3W(RGBW)）
Fixture 3：IRDIP-2016126-00D-13（Single Unit 16x1W(RGBW)）
、IRDIP-2064126-00D-13（Light Set 16x1W(RGBW)）
Fixture 4：IRDIP-9028444-00D-11（Double Light 7x10W(4IN1)）
（For development ）
Fixture 5：IRDIP-4064164-00D-11（双灯 16x3W(RGBW)）
（For development）
Fixture 6：IRDIP-2016124-00D-11（双灯 16x1W(RGBW)）
（For development）
Fixture 7：IRDIP-9012426-00D-13（Epar-12x10W（4IN1）Par Light）
Installation
Hanging Or Level Installation
Please find the hole in the middle of the bracket and fix the light with the clamp through these holes before
hanging. You can use hanging cable as assistance. Make sure that the hanging cable can bear the weight which
is 10 times of the hanging subjects.
5/ 7
