IF DIP Setting are set to
AUX ON
and Advanced Mode:
Disc #
Playlist
Playlist Access
Button
Next Track
Button “
”
Prev Track
Button “
”
FFW
Rewind
DISC 1-4 (same)
Playlist in ipod
Preset 5
Next Track
Prev Track
FF Song
RW Song
DISC 5
ALL songs in ipod
Preset 5
“
“
“
“
DISC 6
Aux Source
Preset 5
-
-
-
-
Navigating the iPod:
Changing Songs:
To change songs. Press Preset 2 and song advances.
Changing Playlists:
To change a playlist, Press Preset 5 until you get to the disc number of your playlist you want. To get to
more playlists, you must do it manually.
Accessing All songs:
Go to disc number represented above. (depends on how you set the dip switches up).
Changing to the Aux input:
To change to your Aux device, press Preset 5 until you get to DISC 6.
Bringing up Text:
Press DISP or INFO button while iPod is playing (only in advanced mode with B or C – XM setting.)
*NOTE* Display of TEXT on radio LCD is ONLY supported in ADVANCED MODE with XM mode.
There may be slight delay times when changing tracks depending on the radio software loaded from the factory and how
quickly it will communicate with the adapter and the iPod. If the
or
buttons are pressed very quickly and the iPod has not
been allowed enough time to change tracks, the track number display on the radio may not load correctly. You will also hear
short bits of audio if these buttons are pressed too quickly. Remember that you have full access to your iPod buttons, so if you
need to quickly change through track or are searching for a particular artist/song, you can also use the iPod itself.
