30
Changing Bands
Press the “RADIO” button a few times until “SAT” is displayed on the screen. Imneotely
turn the rotary knob to scroll through the available sources. Once the band you would
like to select is displayed (“HD-AM” or “HD-FM”), press the “<<CAT/FLDR” button to
select it.
Store Presets
Press the “SCAN” button. Once in the Preset Menu turn the tune knob to select the
preset location (1-18) where you wish to store the preset. When the preset position is
displayed (for example PRE1) press “CAT/FLDR>>” to store the preset into memory.
The screen will display “PR SAVED” and your preset has been stored into memory.
Recall Presets
Press the “SCAN” button to enter the Preset Menu. Turn the Tune Knob to scroll
through the stored preset stations. When the desired preset is displayed, press the
“<<CAT/FLDR” button to select it.
Exit menus
Press the “SCAN” button to exit the Preset Menu and continue playing the current
station. “EXIT” will be displayed when the button is pressed. You can also wait the
allotted 10 seconds and the menu will exit automatically.
Steering Wheel Controls
Press and hold“▲” to tune up or “▼” to tune down.
Changing Display
It is very important that you have the display mode set to “Channel Name” in the 2004-
2006 models. Press the “DISP” button until you see “Channel Name”
Selecting AUX Input
Entering Mode Select Menu
Press the “RADIO” button a few times until “SAT” is displayed on the screen.
Imneotely turn the rotary knob to scroll through the available sources. Once “AUX” is
displayed, press the “<<SEEK” button to select it.
Selecting Factory Installed Satellite
Radio (If equipped)
Entering Mode Select Menu
Press the “RADIO” button a few times until “SAT” is displayed on the screen. Im
-
neotely turn the rotary knob to scroll through the available sources. Once “SAT” is
displayed, press the “<<SEEK” button to select it.
