V E H I C L E I N S T A L L A T I O N
5
Acura
Before connecting any cables to the black box you must set the dip switch to the
Chrysler New / Honda / Acura position. If you set the dip-switches after you have
connected cables to the box, you must disconnect and reconnect them for the changer
to operate.
§
All Models (1992-2001) –
Connector behind the radio, use the “Chrysler
New” cable and the black box settings above.
§
Acura NSX, SLX, and MDX (1996 and Up) –
Not Compatible.
§
Acura’s with navigation are not compatible.
The radios display may not show the proper disc number after disc six. You can
use all 10 discs in the magazine, but the readout will be wrong. This is not a
technical problem; the car stereo was designed for no more than six discs.
Switch to the Neo Changer by pressing the CD button on the radio.
This step
may take up to three minutes.
Some radio models require pressing “
Seek >
”
once to start playing after changing CD or after startup.
Some Acura’s have a direct access disc system, to select a disc enter the number
into the keypad; Press button number “3” for disc number 3 in the magazine. See
your vehicle’s audio operation manual for detailed information.
To change tracks simply press “
Seek <
” or “
Seek >
”
INSTALLATION WARNING
Initial use of the changer can take
up to three minutes
. The radio must check the
magazine in the changer.
*Due to the direct access disc system, you will not be able to directly access
discs 7-10. To access these discs you will have to go to the last track on disc 6
and let it play until it loads disc #7. ( you can fast forward the track, but you
must let it play the last 5 seconds of the track, for it to change to disc # 7
S E T T I N G S
F O R A L L
A C U R A S
1
2
3
4
5
6
7
8
ON
OFF
OFF
ON
OFF
OFF
ON
OFF
O P E R A T I O N
