10
GLOBAL COMMAND: RESET ALL ENERGIZERS
(without turning
any of the energizers off and without clearing the individual energizer memory
conditions)
Master PIN followed by *77#
The individual energizer must first be turned Off and On again to clear its own
specific alarm memory condition prior to issuing this command. The
advantage of this method is that if the alarm condition persists on the specific
energizer the alarm condition will repeat itself on the Master. Failing to issue
the Off followed by the On command to the specific energizer will result in the
alarm condition repeating itself on the Master.
Note: A Tamper alarm requires an Energizer Turn “Off” ( either global or specific
command ) followed by this option.
