12
AGRI xJ
Using the Nemtek key-chain remote
USING THE NEMTEK KEY-CHAIN REMOTE
The Nemtek key-chain remote functions as either a handy torch, or as an
interface to the Agri xJ range of energizers.
The torch function can be activated in two different ways. By either holding
down the button until the torch activates, or by switching the remote on,
navigating through the menu to the item TORCH, and selecting the function
by pressing the
button. With the torch activated, you can increase
brightness by pressing the
button. To increase brightness quickly, hold
down the button. Use the button to decrease brightness.
To turn the Nemtek key-chain remote on, press the button briefly. If you
press the button for an extended period, the torch function will be activated
instead.
The remote has its own internal menu through which you can navigate back
and forth using the or buttons.
To select the displayed function press the key. Some items require the
button to be pressed for an extended period, like the menu item PIN.
The remote can be turned off by navigating back to the NEMTEK item and
pressing the button.
The menu item PIN selected through the long press of the button, allows
the setting of a user pin. This user pin is used in locking an energizer. To
change a digit in the pin, cycle through to the digit by repeatedly pressing
and releasing the button. The flashing cursor beneath the digit to be edited
will move to the right with each press and release of the button. Increase
or decrease the value of the digit by pressing the or buttons. Once the
desired pin is set by repeating this process for each digit in the pin, commit
the pin to the remotes memory through the long press of the button. The
menu will return to the item NEMTEK. The pin is stored in the remote even
when the batteries are removed. Typically the pin need only be set once.
You need to remember or make a note of this pin for later referral so that in
the even your remote is lost or destroyed, that you can re-enter the same pin
into another or new remote. If you have locked an energizer using a remote,
and now no longer have access to that remote and you do not know what pin
was programmed into the remote, then to unlock your energizer can only be
done by returning your energizer to Nemtek.
