11
AGRI xJ
Operating without a key-chain remote
OPERATING WITHOUT A KEY-CHAIN REMOTE
Operating the energizer without a Nemtek remote is straight forward.
Once the energizer is connected to the fence, plug the black (-) battery clip
into the energizer and clip the other end of the lead onto the battery negative
terminal. Then plug the red (+) battery clip into the energizer and clip the
other end of the lead onto the battery positive terminal. If the factory default
settings have not been altered, the energizer will begin operating at 9 kV
pulsing once per second. The high intensity pulse rate & warning light should
flash once with each fence pulse.
If the pulse rate & warning light double pulses, the energizer is working
harder than 95% of its design capacity. The higher the fence voltage is set, or
the larger the fence, or more foliage touching the fence, the greater the
energizer effort required to energize the fence.
The battery state indicator glows green if the battery voltage is greater than
11.0 V, glows yellow when the battery voltage falls bellow 11.0 V, but is
greater than 10.2 V, and glows red when the battery voltage falls bellow 10.2
V. The energizer will shutdown when the battery voltage falls bellow 10 V
