background image

 

SAFETY NOTES 

General Power Tool Safety Warnings 

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE 

The term “power tool” in all of the warnings refers to your battery-operated (cordless) Nemo drill. 

1)

 

Work-area safety

 

a) All work carried out should be done in accordance with the local, state, and government occupational 
safety and health guidelines.  

b) Keep work area clean and well lit.  

c) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, 
gases or dust.  

d) Keep children and bystanders away while operating a power tool.  

2)

 

Personal safety

 

a)

 

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use 

a power tool while you are tired or under the influence of drugs, alcohol or medication.  

b) Use personal protective equipment. Always wear eye protection.  

3)

 

Power tool use and care  

a) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the 
power tool or these instructions to operate the power tool.  

b) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any 
other condition that may affect the power tools operation. If damaged, have the power tool repaired by 
an authorized service technician before use.  

c) Use the power tool, accessories and tool bits, etc. in accordance with these instructions and in the 
manner intended for the particular type of power tool, taking into account the working conditions and 
the work to be performed. Consult local, state, and government occupational safety and health 
guidelines before operating the power tool.  

4)

 

Battery tool use and care 

a)

 

Recharge only with the charger specified by the manufacturer.  

b) Use power tools only with specifically designated battery packs.  

Summary of Contents for DDV2-18-3Li-50

















Reviews: