21
Pressurizing the Angle Grinder for Underwater Use
Your angle grinder can be used in any wet conditions, and can be
submerged and used underwater at depths of up to 50m (164ft).
Before submerging the Angle Grinder to any depth, it must be
pressurized.
1.
Remove the red cap from the pressure valve on the foot of the
angle grinder.
2.
Attach a pump, such as the hand pump supplied with the angle
grinder, to the valve.
3.
Pressurize the angle grinder according to the depth to which
you are going to submerge it, as follows:
Depth
Pressure
Up to 5m
Minimum 1 Bar
Up to 10m
Minimum 2 Bars
Up to 20m
Minimum 3 Bars
Up to 30m
Minimum 4 Bars
Up to 40m
Minimum 5 Bars
Up to 50m
Maximum 6 Bars
Caution:
Never add more than 6 Bars of pressure to the
angle grinder.
Summary of Contents for AG-22-5Li-50
Page 1: ......
