12
Fitting the Angle Grinder Wheel Guard
The wheel guard protects you from sparks, debris, and fragments if
the wheel or disc shatters during use. Always ensure that the closed
side of the guard faces toward you. The wheel guard must be in
place before mounting all wheels or discs, except for abrasive discs.
1.
Ensure the speed selector switch is in the Off position (
0
).
Caution:
To minimize the risk of accidental activation,
ensure the speed selector switch is in the Off (
0
)
position before performing any maintenance on the
angle grinder, as well as during transport and storage.
2.
Position the wheel guard (1) so that the protrusion on the
wheel guard band is aligned with the notch on the angle
grinder’s bearing box (2).
3.
Rotate the wheel guard 180 degrees, and tighten the screw (3)
securely.
4.
To remove the wheel guard, loosen the screw, rotate the wheel
guard back to its initial position, and then remove it from the
angle grinder.
Summary of Contents for AG-22-5Li-50
Page 1: ......
