8
Installation of the feet
Risk of fire.
This appliance has been designed to operate with specific feet. Do not use the appliance without
installing the feet first.
Using the appliance without feet may cause fire due to overheating.
If the feet are not installed on the appliance, they are inside the cooking chamber and must be screwed into
the four threaded holes on the underside of the oven.
Placement
Place the appliance on a perfectly level work surface.
Should the appliance be installed near walls, shelves, or ceilings they must be of the non-flammable
or heat-insensitive type; otherwise, they must be protected by an adequate fire retardant coating.
NOTES
The appliance is unsuitable for recessing.
The following minimum distances from heat sources must be complied with to guarantee correct ventilation
of the appliance's electric component compartment:
Rear panel:
19.7 in / 500mm
Left side:
19.7 in / 500mm
Right side:
19.7 in / 500mm
And from near surfaces:
Rear panel:
3.94 in / 100mm
Left side:
3.94 in / 100mm
Right side:
3.94 in / 100mm
Do not obstruct the natural and/or forced ventilation openings on the appliance's exterior.
Do not obstruct the appliance's smoke/steam exhaust pipe.
Failure to comply with these notes WILL omit the manufacturer from any liability and will deem the
warranty invalid.
WARNING