Nemco 6220-17 User Manual Download Page 30

30 

PRODUCT WARRANTY 

Except as otherwise provided below, Nemco Food Equipment, Ltd. (“Nemco”) warrants, to the original user, its electrical/pneumatic 
products  (other  than  blades  and  light  bulbs)  to  be  free  of  electrical  and  mechanical  defects  in  material  and  workmanship  under 
“normal use” (defined below) for the shorter of the following periods: (a) one (1) year from the date placed in service by the original 
user, or (b) 18 months from the date of shipment from its factory. Nemco also warrants its food preparation products (other than 
blades) to be free of mechanical defects in material and workmanship under normal use for two (2) years from the date placed in 
service by the original user. PaniniPro Sandwich Press to be free of electrical and mechanical defects in material and workmanship 
under “normal use” (defined below) for the following periods: (a) One (1) Year Labor, (b) Two (2) Year Parts. In addition, Nemco 
warrants  its  Global  Solutions  food  preparation  and  electrical  products  (other  than  blades)  to  be  free  of  mechanical  defects  in 
material  and  workmanship  under  normal  use  for  one  (1)  year  from  the  date  placed  in  service  by  the  original  user.  The  warranty 
provided  for  herein shall  be  limited  to  parts and  labor.  Any  determination  that a  product  is  defective  or  covered  by  this  warranty, 
shall be made by Nemco, in its sole discretion. The determination of whether to repair or replace a defective, covered product, or to 
refund the purchase price for the product, will be at N

emco’s sole discretion. This warranty does not cover products used outside 

the United States, or damages caused by accident, misuse, negligence of any person other than Nemco, current or voltage other 
than stated on the appliance, fire, flood or other casualty. Any alteration to the product or unauthorized repair voids this warranty. 
For purposes of this warranty, the phrase, “normal use” shall mean the use of the product in connection with food in accordance 
with the product manual accompanying the product. 

Nemco  shall  be  responsible  only  for  repairs  or  replacements  of  defective  parts  performed  by  Nemco’s  authorized  service 
personnel. Authorized service agencies are located in principal cities throughout the continental United States, Alaska and Hawaii. 

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. NEMCO 
EXPRESSLY  DISCLAIMS  ANY  IMPLIED  WARRANTY  THAT  ANY  OF  ITS  PRODUCTS  IS  MERCHANTABLE,  FIT  FOR  A 
PARTICULAR PURPOSE, OR DOES NOT INFRINGE ON THE RIGHTS OF ANY THIRD PARTY. THE FOREGOING WARRANTY 
SHALL BE NEMCO’S SOLE AND EXCLUSIVE OBLIGATION. ANY PERSON’S (BUYER, USER OR OTHERWISE) EXCLUSIVE 
REMEDY AGAINST NEMCO, AND NEMCO’S SOLE OBLIGATION, FOR ANY AND ALL CLAIMS, WHETHER FOR BREACH OF 
CONTRACT, WARRANTY, TORT (INCLUDING WITHOUT LIMITATION NEGLIGENCE), OR OTHERWISE, SHALL BE LIMITED 
TO NEMCO REPAIRING 

OR REPLACING THE PRODUCT, OR, AT NEMCO’S OPTION, REFUNDING THE PURCHASE PRICE 

THEREFOR.  IN  NO  EVENT  SHALL  NEMCO  HAVE  ANY  LIABILITY  FOR  DAMAGES  IN  AN  AMOUNT  EXCEEDING  THE 
PURCHASE  PRICE  OF  THE  PRODUCT,  NOR  SHALL  NEMCO  HAVE  ANY  LIABILITY  FOR  INCIDENTAL,  SPECIAL  OR 
CONSEQUENTIAL  DAMAGES.  Any  person  desiring  to  make  any  claim  against  Nemco  must  do  so  within  six  (6)  months  after 
expiration of the applicable warranty period, or such claim shall be forever barred.  

NOTE:

 

WARRANTY DOES NOT COVER DAMAGE TO THE GRID, GRID COATING OR NONSTICK COATING. IT IS NEMCO’S 

SOLE DISCRETION TO DETERMINE IF A GRID, GRID COATING OR NONSTICK COATING CLAIM IS WARRANTED. 

NOTE

:  WARRANTY  DOES  N

OT  COVER  DAMAGE  TO  THE  ROLLERS  OR  ROLLER  COATING.  IT  IS  NEMCO’S  SOLE 

ISCRETION TO DETERMINE IF A ROLLER OR ROLLER COATING CLAIM IS WARRANTED. 

NOTE

PLEASE  REVIEW  YOUR  PRODUCT  MANUAL  FOR  SPECIFIC  WATER  REQUIREMENTS.  DISTILLED  OR  TREATED 

WATER  MAY  BE  REQUIRED.    PRODUCT  FAILURE  DUE  TO  SEDIMENT  AND  LIME  BUILDUP  IS  NOT  COVERED  UNDER 
WARRANTY.

 

PRODUCT SERVICE 

Nemco  has a staffed service department,  and  we  believe  prompt  service  is  extremely  important  to  our  customers.  Therefore,  we 
request all product service inquiries be handled in the following manner: 

1. The end user should call Nemco Customer Service with the company name, address, phone number, model number, serial number

(if  applicable),  Nemco  Sales  Order  number  or  Dealer  Purchase  Order  number  and  th

e  nature  of  the  problem  (the  “Claim

Information”).

2. The Nemco Customer Service Department will decide on the most appropriate course of action. If Nemco determines that it must

inspect a product, the following procedure will be followed:
The end user will obtain a Return Goods Authorization number from Nemco Customer Service to return the product to Nemco for
inspection.  Please  be  sure  to  use  this  number  on  the  box  and  on  paperwork  sent  with  the  unit.  Return  the  unit  to  Nemco.  The
Nemco Service Department will determine if the problem is covered by the foregoing warranty. If so, Nemco will repair the unit and
return  it  to  the  end  user.  If  the  unit  is  determined  not  to  be  covered  by  the  foregoing  warranty,  the  dealer  will  be  contacted  to
determine the next course of action. If the unit weighs less than 70 lbs., it will be considered a carry-in warranty. The service agent
performing  the  service  must  call  Nemco  Customer  Service  to  obtain  a  Service  Authorization  number  and  provide  the  Claim
Information.  If  the  unit  weighs  70  lbs.  or  more,  it  will  be  considered  an  on-site  warranty,  and  the  service  agent  performing  the
service must call Nemco Customer Service to obtain a Service Authorization number and provide the Claim Information.

TERMS & CONDITIONS

No merchandise shall be returned without prior written authorization.

All returned merchandise must be unused, in original carton and shipped prepaid.

All returned merchandise is subject to a 25% restocking charge.

No returns will be accepted after 90 days of shipping date.

Purchaser should make claim directly to carrier for any damages to merchandise that occur in transit.

This Price List supersedes all previous price lists.

Orders with an invoice value of $2,100 net or more will be shipped freight prepaid to one destination in  the continental United States.

Terms are COD, CIA or Net 30 days with approved credit.

Buyer shall pay all applicable federal, state and municipal sales or use tax.

No minimum order charge.

 

Prices subject to change without notification.

Summary of Contents for 6220-17
































Reviews: