Nelson EZ Pro Jr, Installation And Programming Manual

Page: 17 / 169

PROGRAMMING INSTRUCTIONS - PROGRAM MODE
• INTERVAL waters every X number of days (from 1 to 30 days) (i.e., water
every 3 days, waters every 10 days, etc.). A value of 1 in an interval
schedule means to water every day. When using the interval option, you
have the flexibility to tell the controller what day to start the interval
program on (up to 30 days out).
• EVENT DAYS allows each program to block any specific day(s) from
watering, regardless of the scheduling option (odd/even, interval, or daily).
The LCD will display the currently scheduled program (default is all WATER
DAYS.) The SELECT keys will scroll the LCD display through each of the
scheduling positions WATER DAYS, ODD, EVEN, INTERVAL, and INTERVAL
START DATE. Be sure the PROGRAM dial is set on the program you want to
change (A, B, or C) and that you want to change the current schedule. A
scheduling option is chosen after you press a button, either SELECT or
ADJUST. The old schedule is replaced with the new one. It’s easy to program
a schedule with the following procedures.
Set Water Days Scheduling Option
Turn the large dial to the SCHEDULE position. Use the SELECT till the raindrops
appear above the days of the week. Press the ADJUST ‘+’ button to select that
day for watering or press ADJUST ‘–’ for non-watering days. A flashing indicator
appears over the day you’re about to set. Raindrops appear over selected days to
water. The indicator automatically moves one day to the right after an ADJUST ‘+’
or ‘–’ key press. Continue selecting or deselecting the days you want the
controller to water until you have your 7-day calendar set.
17