22 Nektar Panorama T4 & T6 User Guide www.nektartech.com
Loading a Preset Using the Track Buttons
•
Press the button labeled [Track -] to select it.
•
Make sure “Message Type” is selected. Use the display buttons [Arrow down] or [Arrow up] if needed.
•
Turn [E1/Data] until Message Type “LD PRESET” is selected.
•
Press the display button [Arrow Down] once to select “Preset”.
•
Change the Preset number using [E1/Data].
Note that pressing [Track-] after exiting Control Edit will load the preset number you selected in the last step. Because [Track-] is a global
control and not stored with a preset, the button loads the selected preset at any time. If you assign any of the LED buttons [B1] - [B8], the
LED button may be assigned to a different Message Type in the loaded preset. LED button assignments are not global but stored with a
preset.
Make sure to save any changes you want to retain before loading a preset.
Programming a Fader to Adjust the Velocity Value for Keyboard Fixed Curve
•
Move Fader [F1] to select it.
•
Make sure “Message Type” is selected. Use the display buttons [Arrow down] or [Arrow up] if needed.
•
Turn [E1/Data] until Message Type “FIX VEL” is selected.
•
Press the display button [Arrow Down] twice to select “TARGET”.
•
Choose between Keys or Pads using [E1/Data]. Set it to “PADS.”
Note that the velocity curve for the selected target must be set to “Fixed”.
