Sleep mode functionality
‒
Press the sleep mode
button with the power on.
‒
In sleep mode, the power level is changed to level 1 10 seconds after the LED is turned on; all
LEDs of the operation panel are turned off.
Filter replacement alarm functionality
‒
If a filter has been used for 6 months, the product notifies automatically to replace it.
‒
If the replacement interval has been reached, the LED of the filter replacement part turns on.
Press the filter alarm button (power button) for ca. 5 seconds after replacing the filter to
store the filter replacement interval automatically. Then, the filter replacement alarm will
activate after 6 months of usage time.
※
This functionality activates 6 months after buying and using the product for the first time.
If the LED blinks or is turned on during initial use, press the filter alarm button to store the
replacement interval time.
(You can use without problems as it isn't a product failure)
How to replace filter
1. Flip the product so that its floor side shows up.
2. Turn the screw cap in the center in counterclockwise direction. (open arrow direction)
3. Separate the bottom cover, pull out the used contaminated filter and replace it with a new filter.
4. Fit at the bottom cover's
protruded part and the main body's
concave part.
5.
Fix properly by turning the screw cap in clockwise direction. (close arrow direction)
Power
Filter replacement
5