Indicators
Battery indicators
The lights on the charger indicate the charger status
> The lights on the charger indicate the charger status.
> Check the battery pack capacity pressing the button
Remaining
capacity
display
Overdischarger/Low Loltage
5%<C<50%
50%<C<80%
C>80%
Fig. 17
Battery protection system
The tool is equipped with the protection system, which automatically cuts off the
output power for its long service life.
The tool may stop during operation when the tool and/or battery are placed under
the following situation. This is caused by the activation of protection system and
does not show the tool trouble.
•
When the tool is overloaded: At this time, release the switch trigger and
remove causes of overload and then pull the switch trigger again to restart.
When the tool does not work even after pulling the switch trigger, the battery
power auto-stop is still at work. Charge the battery pack before use.
•
When the remaining battery capacity becomes low: Recharge the battery
pack.
NOTE:
•
The indicated capacity may be lower than the actual level during use or
immediately after using the tool.
•
Depending on the conditions of use and the ambient temperature, the
indication may differ slightly from the actual capacity.
16
