1
f.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
g.
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
Use of dust collection can reduce dust-related hazards.
4. Power tool use and care
a.
Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate
b.
Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dangerous and
must be repaired.
c.
Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
d.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate
the power tool.
Power tools are dangerous in the hands of untrained users.
e.
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect
the power tool’s operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g.
Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and
the work to be performed.
Use of the power tool for operations different from those intended could result in a hazardous situation.
5. Battery tool use and care
a.
A charger that is suitable for one
used with another batery pack.
b.
Use of any other battery packs may
c.
When battery pack is not in use, keep it away from other metal objects, like paper clips, coinskeys, nails, screws or other small metal objecs,
,
that can make a connection from one terminal to another.
d.
Under abusive conditions, liquid may be ejected from the battery; aviod contact. If contact
Liquid
ejected from the battery may cause irritationor burns.
6. Service
a.
This will ensure that the safety of the
b.
If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly
BATTERY AND CHARGER SAFETY WARNINGS
THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR YOUR
BATTERY CHARGER.
1.
Before using the charger read all instructions and cautionary markings on the charger, battery pack and the product using the battery pack.
1.
This charger is not intended for any uses other than charging rechargeable batteries. Any other use
2.
Do not place any object on top of the charger or place the charger on a soft surface that may result in excessive internal heat. Place the charger in a
3.
To reduce risk of damage to the electric plug and cord, pull by the plug rather than the cord when disconnecting the charge
r.
4.
Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
5.
An extension cord should not be used unless absolutely necessary. Use of an improper extension cord
n.
6.
Do not operate the charger if it has received a sharp blow, been dropped or otherwise damaged in any way.Have it checked by an electrician or power
r.
7.
Do not disassemble charger. Take it to an electrician or power tool repairer when service or repair is
8.
To reduce risk of electric shock, unplug the charger from the outlet before attempting any cleaning. Removing the battery pack will not reduce this risk.
9.
Never attempt to connect 2 chargers together.
10.
DO NOT store or use the tool and battery pack in locations where the temperature may reach or exceed 40ºC (such as inside sheds or metal buildings
11.
The charger is designed to operate on standard household electrical power (240 volts). Do not at-tempt to use it on any other voltage!
12.
The battery pack is not fully charged out of the carton. First read the safety instructions and then follow the charging notes and procedures.
13.
The longest life and best performance can be obtained if the battery pack is charged when the air temperature is between 18 - 24ºC. Do not charge
the battery pack in an air temperature below 10ºC or above 40ºC.
This is important and will prevent damage to the battery pack.
for which it was designed.
n
power tool is maintained.
position away from any heat source.
tool repaire
in summer).
3
