Always make sure the power tool is
isolated from the power supply before
fitting any attachment
FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the tool is switched
off and unplugged before adjusting or
checking function on the tool.
CAUTION:
Before plugging in the tool, always
check to see that the switch lever
actuates properly and returns to the
“OFF” position with released.
To start the tool, simply squeeze the
switch lever. Release the switch lever to
stop.
ASSEMBLY
CAUTION:
Always be sure that the tool is switched
off and unplugged before carrying out
any work on the tool.
This tool accepts bits either with or
without a collar on its shank.
To install the bit, follow either procedure
(1) or (2) described below.
Pivot the tool retainer back and slightly
downward. Insert the bit into the tool
holder as far as it will go.
To securely retain the bit , return the tool
retainer to its original position.
CAUTION:
Always assure that the bit is securely
retained by attempting to pull the bit
out of the tool holder after completing
the above procedure.
WARNING
!
ASSEMBLY & OPERATION
9
