5
Warning signs
Children and grownups who have not read instructions are’t allowed to operate the machine.
Make sure there is nobody in working area, especially children and pets.
Keep away from heat source and combustibles.
Description of Product Installation:
1. Disassembly the two screws on the gearbox. See the diagram 2 below.
2. Assemble the wheel casing and tighten the screws up. See the diagram 3
3. Disassemble the bolts M10×25 at the side of the turbine shaft and take out of the adjustable pad. See the
diagram 4
4. Assemble rubber tire to turbine shaft and make sure the axle pin is stuck in the slot. See the diagram 5.
5. If the diameter of spoke end face is 1mm greater than the worm wheel end face’s, it is needed to add a
adjustable pad. If not, it is not needed. See the diagram 6.
6. Finally tighten the bolts up. See the diagram 7.
Please read instructions carefully
before using it and operate the
machinery safely when in
operation.
Unplug sparkplug cap when
repairing and maintaining the
machine.
Diagram 4
Bolt
M10×25
Adjustable pad
φ
35×
φ
25×1
Diagram 5
Axle pin
Axle pin slot
Diagram 2
ScrewM6×20
Diagram 3
Wheel casing
People must keep a safe distance from
the machine.
Don’t touch rotary section of
the rotary tillage knives or
otherwise it may cause injury.
It is necessary to wear safety
goggles and ear protection when
operating the machine.