![background image](http://html1.mh-extra.com/html/neilsen/ct3324/ct3324_instruction-manual_3898043018.webp)
18
2) 3
)
Screw in the spark plug with hand, and then tighten it with spark plug cap.
Attention
:
1. Overheating or damage may occur on gasoline if not screw down the spark plug; however, over
screwing-down may hurt screw thread.
2. Correct ways for screwing up:
With new spark plug, please screw 1/2 circle more after compressing spark plug gasket.
With old spark plug, please screw 1/8-1/4 circle more after compressing spark plug gasket.
3. Recommended spark plug: F7RTC or others with same rank.
●
Other maintaining advices
1
)
Cool down the machine before maintaining, storing and transporting.
2
)
Don’t clean up air filter and muffler of gasoline engine with water, because it may flow into the inner part of
the machine and damage it.
3
)
Forbid from using fuel oil that is dirty, contaminated, watering and wrong, which could damage he gasoline
engine badly.
4
)
Forbid from using lubricating oil that is dirty, contaminated, watering and wrong, which could damage he
gasoline engine badly.
5
)
Don’t tilt gasoline engine in the process of maintenance, storage and transport.
6
)
Please pull out spark plug in the process of maintenance, storage and transport.
7
)
Turn off the switch of fuel oil so as to avoid the possibility of the leakage of fuel oil and lubricating oil when in
transport.
8
)
If should be stored in a long time, always keep the specification as an important material.
9
)
Machine should be stored in ventilated, dry and safe place, and being kept away from fire source.
10
)
Machine should be cleaned up from dirtiness and weeds after in service.
CANNON TOOLS LTD
Add:20 station road, Rowley Regis, west midlands, B65 0 JU.U.K.
Made in China
Diagram 45
0.7mm-0.8mm