• Make sure the engine is stopped.
• Use a round file of proper size for your chain.
File size: 5/32‖(4.0mm) for all models.
Place your file on the cutter and push straight forward.
Keep the file position as illustrated.
After every cutter has been set, check the depth gauge and file it to the proper level
as illustrated.
Be sure to round off the front edge to reduce the chance of kickback or tie-strap
breakage.
10. Maintenance of Saw Chain and Guide Bar
Make sure every cutter has the same length and edge angles as illustrated.
Type
of
chain
File
diameter
Top plate angle
Down angle
Head tilt angle
(55°)
Depth gauge
standard
Vise rotate angle
Vise tilt angle
Side angle
12”
5/32‖
30°
0°
80°
0.025‖
Depth gauge
File
Summary of Contents for CT2298
Page 37: ...15 EXPLODING VIEW...
Page 38: ...13 PARTS LIST...
Page 39: ......
Page 40: ...CANNON EUROPE BVBA Add Akkerstraat 1 Waardamme Oostkamp 8020 Belgium Made in China...