![background image](http://html1.mh-extra.com/html/neilsen/ct1912/ct1912_original-instructions-manual_3928615010.webp)
TROUBLESHOOTING
INSUFFICIENT POWER:
Probable Cause
Solution
Dirty or clogged air passages....... Flush and lubricate tool, drain air tank and supply line
Insufficient air supply..................... Increase line pressure, Make sure compressor
matches tool's air pressure and consumption needs
Air leakage..................................... Use PTFE tape at all fittings and joints. Check tool for worn
or damaged O-rings & seals.
Worn/damaged wear & tear parts.. Replace as necessary.
Tool matching................................ Be sure you are using a tool suited for the torque
requirements of the job at hand.
ASSEMBLY DIAGRAM