8. SPECIFICATION
MODEL NO.
CT1703
CT1707
CT2146
CT1702
CT2886
PLATE SIZE(MM)
(
approx.
)
410*280
510*350
550*410
620*450
WEIGHT (KG)
32.5
62/64
82
88
WALKING SPEED
(M/MIN)(approx.)
20-25
20-25
20-25
20-25
IMPACT FORCE
(KG)(approx.)
1030
1210
1550
1300
POWER SOURCE
(approx.)
2.4HP
GASOLINE
EIGINE
6.5HP
GASOLINE
EIGINE
6.5HP
GASOLINE
EIGINE
6.5HP
GASOLINE
EIGINE
IMPACTION DEPT.
(CM)
15
15
20
20
CLIMB CAPACITY
0-20°
0-20°
0-20°
0-20°
9. TROUBLE SHOOTING
SYMPTOM
POSSIBLE CUASES AND CORRECTION
MOTOR WILL NOT START
CHECK THE ON/OFF SWITCH TO ENSURE THAT IT IS
SWITCHED ‘ON’
CHECK THE FUEL SUPPLY
IF A DIESEL (GASOLINE) ENGINE MOTOR IS FITTED CHECK
THE CRANKCASE OIL AS AN OIL SENSOR DEVICE IS FITTED
TO THESE MOTORS WHICH PREVENTS STARTING AND STOPS
THE MOTOR WHEN THE OIL LEVEL IS LOW
ENSURE THE SPARK PLUG IGNITION LEAD IS CONNECTED.
CHECK THE CARBURETTOR JET AND BOWL TO ENSURE THEY
ARE CLEAN.
MOTOR STOPS
CHECK THE FUEL SUPPLY
CHECK THAT THE FUEL COCK IS TURNED ON
CHECK THE CONDITION OF THE AIR FILTER
PETROL MOTOR LACKS
POWER
CHECK THE CONDITION OF THE AIR FILTER
CHECK THE CONDITION OF THE SPARK PLUG
WATER FLOW STOPS
INSUFFICIENT WATER
BLOCKAGE IN WATER HOSE OR SPRINKLER BAR
INSUFFICIENT VIBRATION
CHECK FOR A SLIPPING OR A MISSING VEE BELT
CHECK THAT THE MOTOR GOVERNED SPEED IS 3,500 RPM
MACHINEIS NOT MOBING
FREELY
CHECK THE UNDERSIDE OF THE PLATE FOR A BUILD UP OF
MATERIAL
Summary of Contents for CT1703
