Neilsen CT1406, Original Instructions Manual

Page: 11 / 16

10
USER
‑
MAINTENANCE INSTRUCTIONS
Procedures not specifically explained in this manual must be performed only
by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Turn off the tool,
detach the air supply, safely discharge any residual air pressure in the tool, and release the
throttle before performing any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If
abnormal noise, vibration, or leaking air occurs, have the problem corrected before further use.
TO PREVENT SERIOUS INJURY FROM EXPLOSION: Lubricate the tool only
with specified lubricants. Lubricate the internal mechanism using only white lithium
grease.Other lubricants may damage the mechanism and may be highly
flammable, causing an explosion.
Cleaning, Maintenance, and Lubrication
Note: These procedures are in addition to the regular checks and maintenance explained as
part of the regular operation of the air-operated tool.
1. Daily - Air Supply Maintenance: Every day, maintain the air supply according to the
component manufacturers' instructions. Maintain the lubricator's oil level. Drain the moisture
filter regularly. Performing routine air supply maintenance will allow the tool to operate more
safely and will also reduce wear on the tool.
2. Make sure that the Housing that holds the blades and Air Inlet (9) are free of dirt and debris.
3. Periodically: Apply a light machine oil to the pivot point on the Throttle.
4. Before Each Use: Check to make sure blades and Blade Guard are securely in place. If
necessary, tighten the Set Screws (30).
5. Quarterly (every 3 months)
– tool Disassembly, cleaning, and inspection: Have the internal
mechanism cleaned, inspected, and lubricated by a qualified technician.