7
5. Connect the air supply hose to the Quick Connector on the Die
Grinder. Turn on the air compressor, and set its regulator to the
recommended 90 PSI for the Die Grinder. (See Figure A.)
6. In order to keep the air supply hose out of the way, hang it over your
shoulder.
7. IMPORTANT! Grip the Die Grinder firmly with both hands.
8. Trip the Safety with your finger. Then slowly apply hand pressure to the
Trigger until the desired speed is obtained. NOTE: The Die Grinder always
turns the Grinding Drum clockwise. (See Figure C.)
9. With a firm grip on the Die Grinder, lightly apply the Grinding Drum to
the workpiece, slowly and steadily moving the Grinding Drum to the right
and left until you have achieved the desired appearance (finish) on the
workpiece.
10. Once the work is completed, release hand pressure on the Trigger.
The Safety will automatically return to its locked position to prevent the