3
tired or under the influence of drugs, alcohol, or medication. A
moment of inattention while operating pneumatic tools may result in
serious personal injury.
2. Dress properly. Do not wear loose clothing or jewelry. Contain
long hair. Keep your hair, clothing, and gloves away from moving
parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
3. Avoid accidental starting. Be sure the Trigger is off before
connect- ing to the air supply. Carrying pneumatic tools with your finger
on the Trigger, or connecting pneumatic tools to the air supply with the
Trigger on, invites acci- dents.
4. Remove adjusting keys or wrenches before turning on the tool. A
wrench or a key that is left attached to a rotating part of the tool may result
in personal injury.
5. Do not overreach. Keep proper footing and balance at all times.
Proper footing and balance enables better control of the tool in
unexpected situations.
6. Use safety equipment. Always wear ANSI approved safety glasses
under- neath a full face shield, and hearing protection.
TOOL USE AND CARE
1. Use clamps or other practical ways to secure and support the
workpiece to a stable platform. Holding the work by hand is unstable
and may lead to loss of control. Only work on a workpiece that is properly
secured.
2. Do not force the tool. Use the correct tool for your application. The
correct tool will do the job better and safer at the rate for which it is
designed.
3. Do not use the power tool if the Trigger does not turn it on or off.
Any tool that cannot be controlled with the Trigger is dangerous and must
be replaced.
4. Disconnect the air hose from the tool before making any
adjustments, changing accessories, or storing the tool. Such
preventive safety measures reduce the risk of starting the tool