6
To Operate The Die Grinder:
1. WARNING! Always wear ANSI approved safety glasses, a full face
shield, and hearing protection when operating the Die Grinder.
2. Use the two Spanners provided to loosen the Collet Nut.
(See Figure B, next page.)
3. Insert the Collet into the Spindle. (See Figure B.)
4. Insert the 1/4” diameter shank of a Grinding Drum (not included) fully
into the Collet. Then, firmly re-tighten the Collet Nut to lock both the Collet
and Grinding Drum in place. (See Figure B.)