![background image](http://html1.mh-extra.com/html/neilsen/ct0768/ct0768_instruction-manual_717788013.webp)
MAINTENANCE
GENERAL
When servicing, use only identical
replacement parts. Use of any other part
may create a hazard or cause product
damage.
DO NOT use solvents when cleaning plastic
parts. Most plastics are susceptible to
damage from various types of commercial
solvents and may be damaged by their use.
Use clean cloth to remove dirt, dust, oil,
grease etc.
Do not at any time allow brake fluids,
gasoline, petroleum-based products,
penetrating oils, etc. to come in contact
with plastic parts. They contain chemicals
that can damage, weaken or destroy
plastic.
DO NOT abuse power tools. Abusive
practices can damage the tool as well as the
work piece.
DO NOT attempt to modify tools or create
accessories not recommended. Any such
alteration or modification is misuse and
could result in a hazardous condition
leading to possible serious injury. It will
also void the warranty.
LUBRICATION
All of the bearings in these electric tools are
lubricated with a sufficient amount of high-
grade lubricant for the life of the unit under
normal conditions. Therefore, no further
lubrication is required.
13
WARNING
!
Have you read “POWER TOOL
SAFETY”, “Impact wrench SAFETY”,
“BATTERY & CHARGER SAFETY”
and “SYMBOLS” on pages 3,4,5,6 & 7
of this manual? If not, please do it
now before you operate this impact
wrench. Your safety depends on it!
Every time you use the impact wrench
you should verify the following:
1. Make sure the trigger switch
is in the locked position
before you fit any attachment
see Fig 2
2. Before starting the job in
hand make sure the left/right
switch is in the correct
position start wrench to see
that the rotation of the
wrench is going the way you
want to use it
Failure to adhere to these safety rules
can greatly increase the chances of
injury.
WARNING
!
WARNING
!
WARNING
!