Neilsen CAR2K, Instruction Manual, Page: 20 / 24

12
．
FUSE REPLACEMENT
The inverter protected by our integral electronic circuit and will automatically
reset.
More than that, this inverter is equipment with a fuse that is located inside the
inverter. If reverse polarity connection, the fuse burn. Please you need open the
bottom to replace the fuse. There are some spare fuses inside of inverter’s
packing.
Please replace the fuse by same size as burn one. Normally after you replace
the new fuse, the inverter recovers automatically. But sometimes there is a kind
of special condition, even after you replace the new fuse, the inverter still not
working properly, then please you need contact technician to find and fix the
problems.
Caution: High voltage and high temperature inside!
Remark:To replace the fuse, please open the fuse case on the input side board.
Then replace the fuse. Try to find out the cause of the problem before attempting
to use the unit again.