RX1 T R I M G U I D E – E N G LI S H
Select the correct Neil Pryde RacePro or Race mast
♦
Consult the relevant section of this guide
Select The Correct Mast Base
♦
Consult the section of this guide pertaining to the size of your sail.
♦
Select the recommended base, and adjust it as shown.
Select The Correct Boom and Adjustment Position
♦
Consult the section of this guide pertaining to the size of your sail.
♦
Select the recommended boom, and adjust it as shown.
To Trim the Outhaul
♦
First check the boom dimension as printed on the tack.
♦
Outhaul until the clew is within 1–3cm of the correctly adjusted
recommended boom.
♦
Measure from the leading edge of the mast (at the center of the
boom cutout) to the aft edge of the clew (between the two grommets)
to fine tune the outhaul.
To Trim the Downhaul
♦
First check the correct base setting as printed on the tack of the sail.
♦
Downhaul until the tack is within 1-3cm of the pulley.
♦
Downhaul until you reach the desired luff tension.
H OW TO S ET U P T H E R I G
Recommended Luff 471.5
MAST 460
471.5
4
Measure
from the leading edge of the mast (at the center
of the boom cutout) to the aft edge of the clew.
Example
: Recommended luff 471.5.
