NEFF U 1644 Series, Operating And Fitting Instructions Manual

Page: 43 / 116

43
EasyClean
The oven cleaning function featured in your oven is
Main oven intended to help you keep your oven neat and tidy.
An amount of cleaning solution is vaporised
automatically. The combined effects of heat and
steam soften the soil deposits on the oven wall
enamel and facilitate their removal.
Caution:
Never pour cold water into the oven while it is still
hot.
The cleaning system can only be activated when
the oven has cooled down completely
(room temperature).
Use normal water only, and no distilled water.
Activate oven cleaning:
1.
Remove the baking sheet and the universal
pan from the oven. The wire shelf may
remain in the oven.
2.
Pour approx. 400 ml of water mixed with a little
dishwashing detergent into the floor pan of the
oven cavity.
In the case of heavy soil build-up, you may wish
to allow the cleaning solution to soak in for a
while before you activate the cleaning function.
3.
Close the oven door.
4.
Turn the function selector until EasyClean
appears on the text display.
After approx. 3 seconds
EasyClean In operation
is displayed.
The cleaning aid runs automatically.
The programme ends after 21 minutes.
A signal sounds and
EasyClean End is indicated
on the text display.
When
EasyClean flashes on the text display,
the oven has not cooled down completely.
Switch the oven off and wait until it has cooled
down to room temperature.
Restart
EasyClean.
Switching the oven OFF:
Turn the function selector to the 0 position.
Function selector