8
Installation
Statutory
requirements
This installation must conform with the following:
Ø
Manufacturer’s Installation instructions
Ø
Local Gas Fitting Regulations
Ø
Municipal Building Codes,
Ø
Refer to AS/NZS 5601.1 for Gas Installations.
Ø
S.A.A. Wiring Code
Ø
Local Electrical Regulations
Ø
Any other statutory regulations
Preparing to install
Refer to AS/NZS 5601.1 for piping size details. These
built-in hobs are intended to be inserted in a benchtop
cutout.
Do not stick the hob onto the worktop with silicone.
Only an officially authorised technician should connect
the appliance.
Before you begin, turn off the gas and electricity supply.
Installation dimensions are shown in Fig.1.
Fig. 1
